The iconic driving light now has a brother. Incorporating new in house engineered and designed optics partnered with OSRAM LED technology and styling updates, the ARB Intensity Solis has pushed the limits of driving light technology once again and produced a unique design, feature packed and highly capable driving light.
Offered in a dedicated spot or flood optic and included optional colored (Red/Black) bezel inserts that will surely please all in the market, as well as updating to a high pressure die cast bracket that provides a rock-solid foundation for this beast of a light to mount too. This is only the start, the ARB Intensity Solis driving light also includes a digital-controlled touchpad that controls dimming for your set of ARB Intensity Solis driving lights as well as many other new features.
ARB Intensity Solis has been redesigned from the ground up with performance front-of-mind yet keeping styling and design consistent to complement the range of vehicles and bar work in the market. Optics were revamped to reduce flat spots that are common with most LED driving lights and to fit more LEDs yet keeping similar dimensions. This changes the LED count from 32 LED’s to 36 LED’s. LED’s are still a high-powered OSRAM LED, which is among the best LED available on the market. The 36 LEDS are made up of 30 x 4W LED’s and 6 x 10W LED’s to deliver class-leading distance down the road and a beam pattern that is perfected for driving conditions.
The ARB Intensity Solis now has a unique digital-dimmer controller. The controller is preset with intensity settings designed to enhance your driving experience. These settings are hard programmed into the digital controller. Using modern styling lines and keeping the controller as small as possible, the controller provides a seamless fit and finish to most modern dashes. If you prefer your dash switch-free, the ARB Intensity Solis comes fully-integrated into the ARB LINX system providing complete control over your vehicle accessory lighting system with the optional LINX controller harness.
The ARB Intensity Solis has a plug-and-play harness which includes H4 and HB3 connectors to quickly connect into most vehicle lighting systems. A unique 4-pin connector to the rear of the ARB Intensity Solis keeps one cable per light to improve cable management on your vehicle.
Heat management has always been a premium feature of ARB Intensities. Never compromising on quality, intelligent active-thermal management for the light is included and optimized by our designers. The die cast aluminum body acts as a heat sink and allows the dissipation of heat from the light housing quickly to keep the LED’s running at optimal levels. ARB Intensity lights are designed to maximize light output in all driving conditions and increase life expectancy of the light.
Distance at 1 lux is the most widely used method of measuring driving lights performance. ARB Intensity Solis lights throw light farther down the road than can be seen with the naked eye. A single ARB Intensity Solis Spot provides 3386ft which is a 30% increase in light performance over the current ARB Intensity specifications. The single ARB Intensity Solis Flood provides 729m of light performance with up to a 131ft spread on each side of the vehicle. Light color has been updated (made warmer) to reduce eye strain over long driving periods improving driver comfort and reducing fatigue.
Light is thrown 4797ft in a dual spot configuration. The ARB Intensity Solis optics were designed inhouse by ARB engineers to optimize for light quality. ARB engineers refined the optic to capture the most amount of light, removing flat spots on the optic face and controlling the beam reducing stray light and maximizing the potential of each LED.
Refining and updating the look of the ARB Intensity Solis Driving lights, included black PCB boards to give the light depth. The black PCB board also offers a more appealing visual appearance. The ARB Intensity Solis are equipped with interchangeable bezels included with the light that can be changed easily by the customer. The two colors are the iconic ARB red and a black offering a “stealth” look on the front of the vehicle. Optional amber and solid-black covers are also available, as well clear covers as spares. A clear cover is included with each light.
A high-pressure die cast aluminum mount is included with security hardware. The included bracket lowers the light’s mounting position compared to previous ARB driving lights to limit light-bounce on any terrain you can find. The lower position also allows for a greater variety of mounting positions and fits more aftermarket bumpers (see attached fitting guide on popular ARB bars)
The ARB LINX integration will be available in September 2020 and will be included in the next LINX software update. The customer will need to purchase a patch lead that is simple to install and then calibrate the LINX system for the new light. Features will include custom presets, infinite dimming control, courtesy light feature, and dedicated Solis icons and function.
The ARB Intensity Solis is a welcomed update to an iconic Australian driving light. With the new updates to the ARB Intensity Solis driving lights, spot and flood combinations are excellent choice to provide safe visibility. Continuing a tradition of never compromising, superior grade electronics and LED’s, first class ARB active-thermal management, new grades of paint finishes for the bezels, and optimized lens and optic configurations, the ARB Intensity range of lights continues to sets new standards in vehicle lighting.
- Two ARB Intensity Solis Lights
- Wiring Loom Kit
- Two Clear Covers
- 36 Osram LEDs. (6 X10w & 30 X 4w)
- Raw Lumens 18,178LM.
- Effective Lumens 9,546LM Spot, 8,333LM Flood.
- Color Temperature: 5700 Kelvin.
- Distance @ 1Lux – 3386ft Spot, 729m Flood (Single light).
- 11° full beam width Flood.
- 6° full beam width Spot.
- Over Voltage Protection.
- 50,000+ Hour LED life span.
- Operating Temperature -40°C to +65°C, -40°F to +149°F.
- Protected against RFI/EMC interference.
- Integrated thermal management.
- High pressure die-cast aluminium body and mount.
- Virtually unbreakable polycarbonate lens.
- UV stable moulded polycarbonate lens cover.
- Multiple position mount.
- Durable UV stable powder coat.
- Pressure equalisation breather.
- Dust and waterproof to IP68.
- High power Amphenol AT06 waterproof connector.
- Tested to MIL810-STDG for vibration.
- RoHS compliant.
- Input voltage 10-30V DC.
- Power draw 165W.
- Current draw 12.4 Amps @ 13.2V.
- Optional Lens covers sold separately – Clear, Amber & Solid Black
- Security TORX hardware included
- Up & Down Button
- Percentage Changes
- Silicone sleeved for durability and protection
- Multi colored ARB Logo – White/Red
- Intuitive control and touch – no eyes off the road
- 28” (L) x 0.39” (D) x 0.98”
- The Touchpad is required to operate the ARB Intensity Solis lights if no Linx system is connected.